Foton Small 4x2 3m3 To 4m3 Sewage Suction Tanker Truck Sewage
Disposal Trucks
Description:
A vacuum sewage truck is a tank truck with a heavy duty vacuum designed to pneumatically
load solids, liquids, sludge or slurry through suction lines
typically 2-4" in diameter with 3" being the norm. The typical pump
used in the industry is the rotary vane vacuum pump. The truck can
be configured to be a direct PTO/belt or a PTO/hydraulic drive
system. There are two different ways to mount the pump either
directly on the truck with PTO drive or on the trailer with a pony
motor. Each application has different handling characteristics.
Competitive Advantage:
1. Time for full suction less than 5min.
2. The fecal suction pipe can rotate 360 degree.
3. Equipped with hand washing device.
4. Automatic alarm and close the cover when suction full.
(Overfill system with music horn is equipped to prevent the vacuum
pump damage from fecal into
vacuum pump when the tank is full)
5. Optional high-pressure cleaning function of fecal truck.
6. RHD or LHD
7. Strong Power engine
Company Advantage:
1. Factory export department directly sale ,reliable quality
2.Export experience more than 12 years
3.Cheap / competitive price, high quality ,you get more than your
paid
4.With CCC, ISO , BV approved
5. The heart of the service, rational design
Specifications:
| Chassis specific | Drive type | 4×2 |
| Wheelbase (mm) | 3300 |
| Track(front/rear) | 1506/1442 |
| Front axles | 2T |
| Rear axles | 5T |
| Steering | Two spoke steering wheel, recirculating ball type steering gear |
| Gear box | 5 forward speed,1 reserve speed,Mechanical transmission, flexible
shaft drawing type control |
| Clutch | Single ,dry diaphragm spring clutch |
| Brake | Air brake |
| Cabin | Flat cabin and can flip |
| Leaf spring (front/rear) | 8/9+5,6/8+4 |
| Tyre size | 6.50-16,7.00-16 |
| Air condition | According with customer |
| Sewage suction system | Sewage suction pump | Single stage rotary vane oil seal vacuum pump |
| Special equipemnt | Vertical suction lift | ≥8 |
| Absolute working pressure | 8500Pa |
| Rated speed | 500 |
| Theoretical pumping speed | 98L/S |
| Axle power | 5.5kw |
| Input and output diameter | 50mm |
| Filling time | less than 5s |
| upper body specification: |
| Super Tank: Head and the tank made by a molding, thickening,
anti-high-pressure. |
| Sub frame: Full sub-frame with flexible mounting fixed to the truck chassis
by horse bolts. Sub-frame and chassis medium with wooden plates. |
| Vacuum System: Liquid ring vacuum pump, is driven from the PTO on the gearbox,
provides high airflows along with high vacuum levels for removing
debris above or below liquid surfaces. |
| Tank Mounting: The truck will be equipped at our expense with a sub frame
according to truck manufacturer’s prescriptions. |
| Painting: All steel parts are sand blasted before painting. One
anti-corrosion and zinc-rich primer and final painting at
customer’s choice of colour.All steel parts are steel blasted
before painting. Paint markers according to customer’s demand. |
| Suitable for the transport of non-hazardous waste products and
built according to the design rules for vacuum operated waste
tankers. |
